What is the service life of aluminum foil glass fiber cloth? Next, Xia Tian thermal insulation composite material will introduce it to you. Aluminum foil glass fiber cloth adopts unique and advanced composite technology, takes glass fiber as the base cloth and selects special flame retardant adhesive to form a dense film. It has the characteristics of smooth and flat aluminum foil surface, high light reflectivity, large vertical and horizontal tension, air tightness, waterproof, good sealing performance and strong weather resistance.
The length of service life depends on how you use it. If you are exposed and do not take any protective measures, the service life is only 4-6 years; However, if you install the nano airbag reflector under the iron sheet, or cover the surface with oil paper or other things, it will take more than ten years.
Aluminum foil cloth is composed of aluminum foil conductive cloth and hot sol. It is compounded with special flame retardant adhesive to form a dense film. Aluminum foil has smooth and flat surface, high light reflectivity, high longitudinal and transverse tensile strength, good air tightness and waterproof, good sealing performance, high shielding rate, strong material toughness and low price. It can effectively shield the electronic interference generated by any electronic products and equipment. It is also a substitute for conductive cloth.
It is mainly used for the protection and binding of chemical equipment such as oil pipeline and steam pipeline, and can also achieve good anti-corrosion, flame retardant and heat insulation effects.
Technical parameters:
Thickness: 0.8-3.0mm
Width: 1000mm
Temperature resistance: 200-250 ℃
Main features:
1. Corrosion resistance is greatly improved: the surface of glass fiber cloth aluminum foil is subject to special anti-corrosion treatment, and the corrosion resistance is greatly improved. At the same time, polyethylene hot air bonding method is adopted, which no longer needs composite adhesive, so as to avoid the hidden danger of corrosion and mildew on the surface of aluminum foil caused by residual water or solvent in the composite process.
2. Direct hot pressing composite saves the cost of composite glue and veneer composite.
3. The water vapor permeability is small, which enhances the water vapor barrier effect: the heat sealing polyethylene layer in the middle of glass fiber cloth aluminum foil is thicker than the general veneer, the moisture permeability is small, and the water vapor barrier effect is good; Reliably protect glass wool and other thermal insulation materials.
4. Better tensile strength and more brittle veneer: the mechanical strength of glass fiber cloth aluminum foil is higher than that of reinforced aluminum foil, which is more suitable for on-line bonding of glass wool factory, rock wool factory and mineral wool factory.
5. The veneer is smoother, which reduces the probability of damage to the aluminum foil surface: due to the thin cloth, the thick polyethylene layer, the glass fiber cloth, the aluminum foil veneer is smoother, and the aluminum foil surface is not easy to be damaged by friction, so it can give better play to the moisture-proof function
